Few Questions About Resources And Caching

[scott]

Memcache Optimum Cache LSCache

[admin]

I just did a fresh install cpanel + CloudLinux + CageFS + PHPSelector + Litespeed and LSCache.

I also plan on installing and using Optimum Cache and we will need to have Memcache running but only because we will offer railgun and it is needed for that. Do you forsee any issues running these together? Anything I should watch out for?

Server Specs

32GB Ram
RAID 10 SSD
Intex Xeon D-1520 4/8t @ 2.2/2.4 GHz

The plan is for each server to hold about 150 account with limited sites / domains. We have currently 4 different plans like:

SPEED=50%
PMEM=128MB
VMEM=0
IO=4096KB/s (4MB/s)
NPROC=100
EP=20

SPEED=100%
PMEM=256MB
VMEM=0
IO=8192KB/s (8MB/s)
NPROC=100
EP=25

SPEED=100%
PMEM=512MB
VMEM=0
IO=12288KB/s (12MB/s)
NPROC=100
EP=30

SPEED=100%
PMEM=1024MB
VMEM=0
IO=16384KB/s (16MB/s)
NPROC=100
EP=35

Also looking for any advice on this setup and if it looks solid as far as plans, resources etc, advice is appreciated!

[bogdan.sh]

So far I have two objections for you - 50% speed is totally not recommended as it will cause increased system load due to interrupting processes. You will notice high %sys in top due to that.

Also, I believe 128Mb pmem limit is also to low, even for basic cheap plan. However you may change it later if customers will receive constant 503 errors.

[admin]

Thanks Bogdan, great info. I have no problem to remove the cheaper plan at 128MB as that plan was just an after thought and not something we planned on originally offering.

[admin]

Hello Bogdan, so according to your answer , the minimun of cpu that should be set is 100% ?, to avoid "interrupting processes. " . Please let us know

[andrei]

Hello,

Yes. The minimum CPU that you should set for your packages is 100% (120%, 260%, 840% or whatever). Also dont use OptimumCache, as it will be discontinued. Besides, I dont think youll see any improvements in your case, as youre already using SSDs in RAID10.

Regards.