Confirming some CPU settings.

[2webmaster]

Hi,

Just want to confirm.
CPU=20%
Core=2
The above LVE can consume 20% of 2 cores for a total of 40% or 10% less then 1/2 core.

CPU=37%
Core=3
The above LVE can consume 37% of 3 cores for a total of 111% or rounded off to a total of 1core +11%

The above thoughts used the below as a guide of sorts:
https://helpdesk.cloudlinux.com/inde...s-only-x-limit

Correct yes?no?maybe?

Thanks
Frank

[iseletsk]

Please, read that article again.
It is 20% of all CPU capacity or 2 cores, which ever is smaller

Or 37% of all CPU capacity or 3 cores -- which ever is smaller.

[2webmaster]

This might be were my confusion lays.

> If you have 8 cores available and you assign TWO cores to the LVE, the absolute most each core can consume is 25% (2cores x 100) / 8 (total cores) for each core.

I would translate like this:
CPU=25%
Core=2

The above LVE can consume 50% of 2 cores for a total of 50% or 1/2 core.

My translation should have read:
The above LVE can consume 25% of all cpu (in this case 25% of 8 cores) or 2 total cores whatever is smaller.

If the above is correct. Then I believe i got it!!!

Thanks for answering all of our questions about the usage settings.

Frank

[iseletsk]

> My translation should have read:
> The above LVE can consume 25% of all cpu (in this case 25% of 8 cores) or 2 total cores whatever is smaller.

This is correct.

[2webmaster]

Due to set-up of server.

If I say this:
CPU=12.5%
Core=2

The above LVE can consume 12.5% of all cpu (in this case 12.5% of 8 cores) or 2 total cores whatever is smaller. With that in thought the LVE could never reach 2Core because it would hit the CPU% limit first. Therefore we could also look at it as allowing the LVE to use a total of 1 Core.

Is that logic correct?

[iseletsk]

Correct.